Skip to content

HELPING YOU SHINE SINCE 1999

Skip to product information
1 of 4

P&S Detailing Products

P&S Brake Buster: Acid-Free Foaming Wheel Cleaner

P&S Brake Buster: Acid-Free Foaming Wheel Cleaner

Regular price €15,99
Regular price Sale price €15,99
Sale Sold out
Taxes included. Shipping calculated at checkout.
Size
View full details

P&S Brake Buster: The Wheel Cleaner That Set the Standard

P&S Brake Buster is the acid-free foaming wheel cleaner that professional detailers reach for first. Engineered with a powerful surfactant blend, it dissolves brake dust, road oils and grime from any wheel finish without acid, without harsh fumes and without compromise on safety.

Whether you are cleaning a daily driver or a high-end show car, Brake Buster cleans deeper than a typical car shampoo while staying safe on clear-coated, painted, polished and bare metal wheels. It is the chemistry that earned P&S its reputation in the detailing world.

Why Detailers Trust Brake Buster

  • Acid-free formulation: safe on every common wheel finish including clear coat, painted, polished aluminium, chrome and bare metal.
  • Powerful foaming action: clings to the wheel face and barrel for extended dwell time, lifting grime instead of running off.
  • Total cleaning power: dissolves brake dust, road oils, traffic film and tar in a single application.
  • No harsh fumes: safer to use in enclosed garages than acid-based wheel cleaners.
  • Foam cannon compatible: dilute for full-vehicle pre-rinse coverage on heavily contaminated rims.
  • Made in USA: P&S Detail Products, manufactured by Appearance Technology Group.

How to Use P&S Brake Buster

  1. Rinse the wheels with a strong stream of water to remove loose dirt and grit.
  2. Spray Brake Buster generously onto a cool wheel, covering both face and barrel.
  3. Let it dwell for 1 to 3 minutes. The foam works to lift bonded contamination.
  4. Agitate with a soft wheel brush, paying attention to spokes, lug holes and the inner barrel.
  5. Rinse thoroughly with high pressure water until the wheel runs clean and clear.

Pro tip: for heavy contamination, dilute Brake Buster 1:1 with water in a foam cannon and pre-soak the entire wheel area before agitation.

Important: never apply to a hot wheel. Let the wheel cool first to prevent product flash-off and water spotting.

Product Specifications

  • Type: acid-free foaming wheel cleaner
  • Form: ready to use spray, also foam cannon compatible at 1:1 to 1:4 dilution
  • Surfaces: all wheel finishes including clear coat, painted, polished aluminium, chrome and bare metal
  • pH: neutral, acid-free
  • Available sizes: 473ml (16oz spray), 3800ml (1 gallon refill)
  • Made in: USA, by Appearance Technology Group (ATG)
  • Brand line: P&S Detail Products

Frequently Asked Questions

Is Brake Buster safe on every wheel finish?
Yes. The acid-free formula is safe on clear-coated, painted, polished aluminium, chrome and bare metal wheels. It is the same product detailers use on six-figure show cars.

Can I use Brake Buster in a foam cannon?
Yes. Brake Buster is foam-cannon compatible at 1:1 to 1:4 dilution depending on contamination level. For maintenance washes a higher dilution works fine.

Can I use Brake Buster on calipers and brake components?
Yes, on fully cooled brake components. Rinse thoroughly afterwards. Avoid spraying directly on hot brakes or onto rotor friction surfaces.

Will Brake Buster damage a ceramic-coated wheel?
No. The neutral pH and acid-free chemistry are safe over wheel ceramic coatings and will not strip the coating.

How often should I deep clean my wheels with Brake Buster?
For most drivers, every 4 to 6 weeks. Performance and track cars need it more frequently because their pads generate higher brake dust loads.

Where is P&S made?
P&S Detail Products is manufactured in the USA by Appearance Technology Group (ATG). The Rag Company Europe is the official European distributor.

Product video